Alcatel-Lucent 6850-48 参照ガイド
Port Mirroring and Monitoring Commands
page 48-2
OmniSwitch CLI Reference Guide
September 2009
port mirroring source destination
Defines a port to mirror and the port that is to receive data from the mirrored port, and enables or disables
port mirroring status. Also, enables or diables remote port mirroring.
port mirroring status. Also, enables or diables remote port mirroring.
port mirroring port_mirror_sessionid [no] source slot/port[-port2] [slot/port[-port2]...]
destination slot/port [rpmir-vlan vlan_id] [bidirectional |inport |outport] [unblocked vlan_id]
[enable | disable]
destination slot/port [rpmir-vlan vlan_id] [bidirectional |inport |outport] [unblocked vlan_id]
[enable | disable]
Syntax Definitions
port_mirror_sessionid
Mirroring session identifier.
source
Adds the alphabet “a” to a port mirroring session.
no source
Removes a port or range of ports from a port mirroring session.
slot
Slot number you want to configure.
port
Port number of the interface you want to configure.
port2
Last port number in a range of ports you want to configure.
[slot/port[-port2]...]
Configures multiple source ports.
rpmir-vlan vlan_id
Reserved VLAN (1–4094) to carry the mirroring traffic.
bidirectional
Specifies bidirectional port mirroring.
inport
Specifies incoming unidirectional port mirroring.
outport
Specifies outgoing unidirectional port mirroring.
vlan_id
VLAN ID is the number (1–4094) that specifies the VLAN to protect
from Spanning Tree changes while port mirroring/monitoring is active.
Ports in this VLAN will remain unblocked.
from Spanning Tree changes while port mirroring/monitoring is active.
Ports in this VLAN will remain unblocked.
enable
Enables port mirroring status.
disable
Disables port mirroring status.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
parameter
default
bidirectional | inport | outport
bidirectional
enable | disable
disable on
OmniSwitch
9000;
enable on other
platforms
OmniSwitch
9000;
enable on other
platforms