Alcatel-Lucent 6850-48 参照ガイド

QoS Commands

page 52-50

OmniSwitch CLI Reference Guide

Configures the maximum rate at which to send traffic on the specified QoS port. 

qos port slot/port maximum egress-bandwidth bps

qos port slot/port no maximum egress-bandwidth

The slot number and port number of the physical port.

The maximum amount of bandwidth that may be used for all traffic 
egressing on the QoS port. 

By default, the maximum bandwidth is the maximum allowed for the interface type on which the port 
resides. 

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove a configured maximum egress bandwidth value from a 

port.

• The maximum egress bandwidth value cannot exceed the maximum bandwidth of the interface type 

associated with the port.

• Modifying the maximum egress bandwidth is most useful for low-bandwidth links.

-> qos port 3/1 maximum egress-bandwidth 1000

-> qos port 3/1 no maximum egress-bandwidth

Release 6.1; command was introduced.
Release 6.3.1; bandwidth parameter changed to egress-bandwidth.

Configures the rate at which traffic is received on a QoS port.

Applies configured QoS and policy settings to the current configuration. 

Configures a physical port for QoS.

Displays information about QoS ports.