Alcatel-Lucent 6850-48 参照ガイド

QoS Commands

page 52-54

OmniSwitch CLI Reference Guide

Configures the 802.1p value to be inserted in flows ingressing on an untrusted port.

qos port slot/port default 802.1p value

The slot number and port number of the physical port.

The priority value to be set. Values range from 0 (lowest priority) to 7 
(highest priority).

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• By default untrusted ports will set the 802.1p bit to zero on incoming flows. Use this command to spec-

ify that a different 802.1p value should be applied to the flow.

• The default 802.1p value is not used if there is a matching QoS policy rule that sets the priority.

• Note that on the 802.1p bit for tagged packets received on untrusted ports is set with the default 802.1p 

value, which is configured using the qos port default 802.1p command. If the packet is untagged, 
however, then the DSCP bit is set with the default DSCP value, which is configured using the 

 command.

-> qos port 3/1 default 802.1p 5

Release 6.1; command was introduced.

0

Applies configured QoS and policy settings to the current configuration. 

Configures a physical port for QoS.

Displays information about QoS ports.