Alcatel-Lucent 6850-48 参照ガイド
QoS Policy Commands
page 53-90
OmniSwitch CLI Reference Guide
September 2009
policy condition flow-label
Configures an IPv6 flow label value as a policy condition. This value is compared to the flow label value
in the IPv6 header.
in the IPv6 header.
policy condition condition_name flow-label flow_label_value
policy condition condition_name no flow-label
Syntax Definitions
condition_name
The name of the condition.
flow_label_value
The flow-label value (0–1048575).
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use the no form of the command to remove the flow label value as a condition; however, at least one clas-
sification parameter must be associated with a condition.
sification parameter must be associated with a condition.
Examples
-> policy condition cond4 flow-label 1500
-> policy condition cond4 no flow-label
Release History
Release 6.1.3; command was introduced.
Related Commands
Applies configured QoS and policy settings to the current configuration.
Shows information about policy conditions configured on the switch.