Alcatel-Lucent 6850-48 参照ガイド

QoS Policy Commands

page 53-96

OmniSwitch CLI Reference Guide

Configures a source MAC address for a policy condition.

policy condition condition_name source mac mac_address [mask mac_mask]

policy condition condition_name no source mac

The name of the condition. May be an existing condition name or a new 
condition.

The source MAC address in the Layer 2 header of the frame (for exam-
ple, 00:20:da:05:f6:23)

Optional. The mask for the source MAC address (for example, 
ff:ff:ff:ff:ff:ff).

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of the command to remove a source MAC address from a condition; however, at least 

one classification parameter must be associated with a condition.

• A source MAC address and a source MAC group cannot be specified in the same condition.

-> policy condition cond2 source mac 00:20:da:05:f6:23

Release 6.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Creates a policy condition.

Shows information about policy conditions configured on the switch.