Alcatel-Lucent 6850-48 参照ガイド

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-159

Specifies a source port for a hypothetical packet to show how the QoS software in the switch will handle 
the packet.

show policy classify {l2 | l3 | multicast} [applied] source port slot/port

Uses the Layer 2 classifier for the hypothetical packet.

Uses the Layer 3 classifier for the hypothetical packet. 

Uses the multicast IGMP classifier for the hypothetical packet. 

Indicates that only applied policies should be examined. 

The slot and port number of the source address of the flow.

By default, only pending policies are examined.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use this command to determine if the switch will classify the traffic condition specified and match it to 

a policy. By default the classifier only tests pending policies (policies that have not yet been applied). 
Use the applied keyword to test only those policies that have been applied.

• Use the qos apply command to activate saved policies.

-> show policy classify l2 source port 3/1

See the output example given on 

 for more information about the potential screen display.

Release 6.1; command was introduced.