Alcatel-Lucent 6850-48 参照ガイド
QoS Policy Commands
page 53-220
OmniSwitch CLI Reference Guide
September 2009
show policy list
Displays information about pending and applied policy lists.
show [applied] policy list [list_name]
Syntax Definitions
applied
Displays only those policy lists that have been applied to the switch
configuration.
configuration.
list_name
The name of the list for which you want to display information; or a
wildcard sequence of characters for displaying information about lists
with similar names. Use an asterisk (*) to indicate a wildcard character.
wildcard sequence of characters for displaying information about lists
with similar names. Use an asterisk (*) to indicate a wildcard character.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Information for all rules is displayed unless a list_name is specified.
• Use the
command to display only active policy lists that are currently enforced
on the switch.
• The display may include any of the following characters:
Examples
-> show policy list
Group Name
From Type Enabled Entries
list1
cli
unp
Yes
r1
r2
list2
cli
unp
Yes
r3
+list3
cli
unp
No
r1
r2
r3
character
definition
+
Indicates that the policy list has been modified or has been
created since the last qos apply.
created since the last qos apply.
-
Indicates the policy list is pending deletion.
#
Indicates that the policy list differs between the pending/
applied lists.
applied lists.