Alcatel-Lucent 6850-48 参照ガイド

IP Multicast Switching Commands

OmniSwitch CLI Reference Guide

page 55-35

Enables or disables IGMP querying on the specified VLAN or on the system if no VLAN is specified.

ip multicast [vlan vid] querying [{enable | disable}]

no ip multicast [vlan vid] querying

VLAN on which configuration is applied.

Enable IGMP querying.

Disable IGMP querying.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove an IGMP querying entry on the specified VLAN or on the 

system and return to its default behavior.

• IP Multicast Switching and Routing must be enabled to enable IGMP querying on the system and/or 

specified VLANs.

• If the IGMP querying is already enabled/disabled on the system, then the VLAN configuration will 

override the system's configuration.

• IGMP querying refers to requesting the network's IGMP group membership information by sending 

out IGMP queries. IGMP querying also involves participating in IGMP querier election.

• You can also restore the IGMP querying to its default (i.e., disabled) setting on the system if no VLAN 

is specified, by using only ip multicast querying (e.g., ip multicast querying).

• You can also restore the IGMP querying to its default (i.e., disabled) setting on the specified VLAN, 

by using only ip multicast vlan vid querying (e.g., ip multicast vlan 2 querying).

-> ip multicast querying enable

-> ip multicast querying disable

-> ip multicast querying

-> ip multicast vlan 2 querying enable

-> ip multicast vlan 2 querying disable

-> ip multicast vlan 2 querying

-> no ip multicast vlan 2 querying

enable | disable