Alcatel-Lucent 6850-48 参照ガイド

IP Multicast Switching Commands

page 55-84

OmniSwitch CLI Reference Guide

Enables or disables MLD proxying on the specified VLAN or on the system if no VLAN is specified.

ipv6 multicast [vlan vid] proxying [enable | disable]

VLAN on which to apply the configuration.

Enable MLD proxying.

Disable MLD proxying.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• If the MLD proxying is already enabled on the system, then the VLAN configuration will override the 

system's configuration.

• MLD proxying refers to processing membership information on behalf of client systems and reporting 

membership on their behalf.

• You can also restore the MLD proxying to its default (i.e., disabled) setting on the system if no VLAN 

is specified, by using only ipv6 multicast proxying (e.g., ipv6 multicast proxying).

• You can also restore the MLD proxying to its default (i.e., disabled) setting on the specified VLAN, by 

using only ipv6 multicast vlan vid proxying (e.g., ipv6 multicast vlan 2 proxying).

-> ipv6 multicast proxying enable

-> ipv6 multicast proxying disable

-> ipv6 multicast proxying

-> ipv6 multicast vlan 2 proxying enable

-> ipv6 multicast vlan 2 proxying disable

-> ipv6 multicast vlan 2 proxying

Release 6.1.3; command was introduced.