Alcatel-Lucent 6850-48 参照ガイド
IP Multicast Switching Commands
OmniSwitch CLI Reference Guide
September 2009
page 55-111
show ipv6 multicast port
Display the max-group configuration applicable for all port or vlan instances of a given port or all ports.
The current number of groups learnt on a given port or vlan instance will also be displayed in this show
output..
The current number of groups learnt on a given port or vlan instance will also be displayed in this show
output..
show ipv6 multicast port [slot/port]
Syntax Definitions
slot | port
The slot number for the module and the physical port number on that
module (e.g. 3/1 specifies port 1 on slot 3)).
module (e.g. 3/1 specifies port 1 on slot 3)).
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Specify a VLAN ID to display the configuration information for an individual VLAN.
Examples
-> show ipv6 multicast port 1/6
Max-group 9 Action replace
Total 1 Port-Vlan Pairs
Port VLAN Current Mld Max-group Action
Groups
-------+-----+-------------+----------+---------
1/6 15 5 0 none
Output fields are described here:
Release History
Release 6.3.4; command was introduced.
output definitions
Port
The slot and port number of the IP multicast port.
VLAN
The VLAN associated with the IP multicast port.
Current Groups
The current group associated with the IP Current groups.
IGMP
The IGMP associated with the IP multicast port.
Max-group
The maximum group count allowed on the port.
Action
The action to be taken when the group membership limit is exceeded.