Alcatel-Lucent 6850-48 参照ガイド

IP Multicast VLAN Commands

page 56-6

OmniSwitch CLI Reference Guide

Assigns an IPv4 address, IPv6 address, or a range of addresses to an existing IPMVLAN.

vlan ipmvlan ipmvlan-id address {ip_address [{/prefixlen | mask mask}] | ipv6_address | ipaddress1-
ipaddress2 | ipv6address1-ipv6address2}

no vlan ipmvlan ipmvlan-id address {ip_address [{/prefixlen | mask mask}] | ipv6_address | ipaddress1-
ipaddress2 | ipv6address1-ipv6address2}

Specifies the IP Multicast VLAN number to which the IP address will 
be assigned. The valid range is 2–4094.

Specifies a 32-bit IP Multicast address that will be assigned to the 
IPMVLAN. 

Specifies the Prefix Length of mask.

Specifies the IPv4 address mask.

Specifies a 128-bit IPv6 Multicast address that will be assigned to the 
IPMVLAN.

Specifies the IP Multicast address range.

Specifies the IPv6 Multicast address range.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to disassociate the already assigned IPv4

 

or IPv6 address from the 

IPMVLAN.

• Use optional parameters mask or prefixlen with this command to assign subnet mask to IPv4 Multicast 

Group Address.

• IPMVLAN overlapping is allowed. The same address can be assigned to different 

IPMVLANs as long as the IPMVLANs do not share a common receiver port. (Not supported on 
OS9000E)

• If you assign a range of addresses containing duplicate addresses already assigned to the IPMVLAN, 

an error message will be displayed and no addresses will be added from that range.

32

255.255.255.255