Alcatel-Lucent 6850-48 参照ガイド
AAA Commands
page 58-92
OmniSwitch CLI Reference Guide
September 2009
show aaa server
Displays information about a particular AAA server or AAA servers.
show aaa server [server_name]
Syntax Definitions
server_name
The server name, which is defined through the aaa radius-server or
aaa ldap-server commands or automatically set as ace for ACE
servers.
aaa ldap-server commands or automatically set as ace for ACE
servers.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6800, 6850, 6855, 9000, 9000E
OmniSwitch 9000E, 6855-U24X; VRF supported.
OmniSwitch 9000E, 6855-U24X; VRF supported.
Usage Guidelines
• If you do not include a server name in the syntax, information for all servers displays.
• To display information about an ACE server, use ace as the server_name. Information for ACE is only
available if ACE is specified for Authenticated Switch Access through the aaa authentication
command.
command.
Examples
-> show aaa server ldap2
Server name = ldap2
Server type= LDAP,
Host name 1= ors40535,
Retry number= 3,
Timeout (in sec)= 2,
Port= 389,
Domain name= manager,
Search base= c=us,
-> show aaa server rad1
Server name = rad1
Server type = RADIUS,
IP Address 1 = 10.111.0.1,
Retry number = 3,
Time out (sec) = 2,
Authentication port = 1812,
Accounting port = 1813,
VRF
= "Management-vrf"