Alcatel-Lucent 6850-48 参照ガイド
SNMP Commands
OmniSwitch CLI Reference Guide
September 2009
page 10-19
snmp trap absorption
Enables or disables the trap absorption function.
snmp trap absorption {enable | disable}
Syntax Definitions
enable
Enables SNMP trap absorption. When trap absorption is enabled,
identical, repetitive traps sent by applications during a pre-configured
time period will be absorbed, and therefore not sent to SNMP Manager
stations configured on the switch.
identical, repetitive traps sent by applications during a pre-configured
time period will be absorbed, and therefore not sent to SNMP Manager
stations configured on the switch.
disable
Disables SNMP trap absorption.
Defaults
By default, trap absorption is enabled.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
To view the current trap absorption status, use the show snmp trap config command.
Examples
-> snmp trap absorption enable
-> snmp trap absorption disable
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
trapFilterTable
trapAbsorption
Displays the SNMP trap information. Information includes trap ID num-
bers and corresponding trap names and families.
bers and corresponding trap names and families.