Alcatel-Lucent 6850-48 参照ガイド

Link Aggregation Commands

OmniSwitch CLI Reference Guide

page 12-29

Configures the system priority of the port on the switch that belongs to the dynamic aggregate group.

lacp agg [ethernet | fastethernet | gigaethernet] slot/port actor system priority actor_system_priority

lacp agg [ethernet | fastethernet | gigaethernet] slot/port no actor system priority

Documents that the port is 10 Mbps Ethernet.

Documents that the port is 100 Mbps Fast Ethernet.

Documents that the port is Gigabit Ethernet.

The slot number for this aggregate.

The port that the switch will initially use as the Spanning Tree virtual 
port for this aggregate.

The priority of the dynamic aggregate group. Possible values are 
0–255.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove an actor system priority value from a slot and port associ-

ated with a dynamic aggregate group.

• The ethernet, fastethernet, and gigaethernet keywords do not modify a port’s configuration. See 

 for information on CLI commands to configure Ethernet 

ports.

-> lacp agg ethernet 3/2 actor system priority 65

-> lacp agg ethernet 3/2 no actor system priority

Release 6.1; command was introduced.

0