Alcatel-Lucent 6850-48 参照ガイド

Link Aggregation Commands

OmniSwitch CLI Reference Guide

page 12-33

Configures the partner administrative system ID for a dynamic aggregate group port.

lacp agg [ethernet | fastethernet | gigaethernet] slot/port partner admin system id 
partner_admin_system_id

lacp agg [ethernet | fastethernet | gigaethernet] slot/port no partner admin system id 

Documents that the port is 10 Mbps Ethernet.

Documents that the port is 100 Mbps Fast Ethernet.

Documents that the port is Gigabit Ethernet.

The slot number for this aggregate.

The port that the switch will initially use as the Spanning Tree virtual 
port for this aggregate.

The MAC address of the remote dynamic aggregate group in the hexa-
decimal format xx:xx:xx:xx:xx:xx.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove a partner administrative system ID from a slot and port 

associated with a dynamic aggregate group.

• The ethernet, fastethernet, and gigaethernet keywords do not modify a port’s configuration. See 

 for information on CLI commands to configure Ethernet 

ports.

-> lacp agg 3/1 partner admin system id 00:20:da:05:f6:23

Release 6.1; command was introduced.

0