Alcatel-Lucent 6850-48 参照ガイド

Distributed Spanning Tree Commands

OmniSwitch CLI Reference Guide

page 15-111

Enables or disables interoperability between a 10 GB OmniSwitch stackable or chassis-based switch port 
and a 10 GB OmniSwitch 8800 port

.

 

bridge port slot/port 10gig os8800optimized {enable | disable}

The physical slot and port number of the 10 GB port.

Enables the interoperability status for the 10 GB port.

Disables the interoperability status for the 10 GB port.

By default, the 10 GB port interoperability status is disabled.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Enabling interoperability on a 10 GB port connection between an OmniSwitch stackable or 

chassis-based switch and an OmniSwitch 8800 is required to ensure proper Spanning Tree control of 
the connection.

• It is highly recommended that this type of connection not be configured without first enabling 10 GB 

interoperability.

• Note that this command only applies to 10 GB ports on the OmniSwitch stackable or 

chassis-based switch and is not available on the OmniSwitch 8800.

-> bridge port 1/49 10gig os800optimized enable

-> bridge port 1/50 10gig os800optimized disable

Release 6.1; command was introduced.

vStpPortConfigTable

vStpPortConfigTenGigOs8800Opt

Displays Spanning Tree port information.