Alcatel-Lucent 6850-48 参照ガイド
CMM Commands
OmniSwitch CLI Reference Guide
September 2009
page 1-13
copy flash-synchro
Copies the certified directory version of the primary CMM software to the certified directory of the
secondary CMM.
secondary CMM.
[configure] copy flash-synchro
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• This command is used to synchronize the certified directories of the primary and secondary CMMs.
The two CMMs must be in synchronization if a fail over occurs, otherwise switch performance is lost.
• If the switch is part of a stack, all switches in the stack are updated with the primary CMM files.
Examples
-> copy flash-synchro
-> configure copy flash-synchro
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
chasControlModuleTable
csEntPhysicalIndex
chasControlVersionMngt
Copies the working primary flash version of the CMM software to cer-
tified primary flash. Or copies the working primary flash version of the
CMM software to startup secondary flash.
tified primary flash. Or copies the working primary flash version of the
CMM software to startup secondary flash.