Alcatel-Lucent 6850-48 参照ガイド
Source Learning Commands
page 17-20
OmniSwitch CLI Reference Guide
September 2009
show mac-address-table vpls
Displays Source Learning MAC Address Table contents for VPLS services.
show mac-address-table vpls [service-id] [permanent | learned] [mac-address]
Syntax Definitions
service-id
An existing VPLS ID number.
permanent
Display static MAC addresses.
learned
Display dynamically learned MAC addresses.
mac-address
A 48-bit MAC address (aa:bb:cc:dd:ee:ff). Valid addresses are any non-
broadcast, non-multicast MAC, and non-IEEE reserved addresses.
broadcast, non-multicast MAC, and non-IEEE reserved addresses.
Defaults
By default, all MAC addresses for all services are displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the optional parameters with this command to display information for specific services and MAC
address types.
address types.
Example
-> show mac-address-table vpls 1002 00:01:db:07:03:02
Legend: Mac Address: * = address not valid
Domain Vlan/SrvcId Mac Address Type Protocol Operation Interface
------+------------+-----------------+--------+--------+----------+--------------
VPLS 1002 00:01:db:07:03:02 learned --- servicing sap:0/16:1006
-> show mac-address-table vpls 1002 permanent
Legend: Mac Address: * = address not valid
Domain Vlan/SrvcId Mac Address Type Protocol Operation Interface
-------+-----------+-----------------+---------+------+----------+--------------
VPLS
1002 00:00:00:00:00:05
permanent
---
servicing
sap:0/16:1005
Total number of Valid MAC addresses above = 1
-> show mac-address-table vpls 1002 learned
Legend: Mac Address: * = address not valid
Domain Vlan/SrvcId Mac Address Type Protocol Operation Interface
-------+-----------+-----------------+---------+------+----------+--------------
VPLS
1002 00:01:bd:01:02:01 learned ---
servicing sdp:222:1002