Alcatel-Lucent 6850-48 参照ガイド
Source Learning Commands
page 17-24
OmniSwitch CLI Reference Guide
September 2009
show mac-address-table vpls mesh-sdp
Displays Source Learning MAC Address Table information for the specified VPLS mesh-SDP binding.
show mac-address-table vpls service-id mesh-sdp sdp-id[:vc-id] mac-address
Syntax Definitions
service-id
An existing VPLS ID number.
sdp-id
An existing SDP ID number that is bound to the specified service ID
number.
number.
vc-id
Optional. The VC ID number appended to the specified SDP ID
number.
number.
mac-address
A 48-bit MAC address (aa:bb:cc:dd:ee:ff). Valid addresses are any non-
broadcast, non-multicast MAC, and non-IEEE reserved addresses.
broadcast, non-multicast MAC, and non-IEEE reserved addresses.
Defaults
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• The specified VPLS ID and SDP ID must already exist in the VPLS configuration for the switch. See
the “VPLS Commands” chapter in this guide for information about how to configure a VPLS and SAP.
Example
SW-D-> show mac-address-table vpls 1002 mesh-sdp 222
Legend: Mac Address: * = address not valid
Domain Vlan/SrvcId Mac Address
Type
Protocol Operation Interface
------+-----------+-----------------+--------+---------+----------+-------------
VPLS 1002
00:01:bd:01:02:01 learned
---
servicing sdp:222:1002
VPLS 1002
00:01:bd:01:02:02 learned
---
servicing sdp:222:1002
VPLS 1002
00:01:bd:01:02:03 learned
---
servicing sdp:222:1002
VPLS 1002
00:01:bd:01:02:04 learned
---
servicing sdp:222:1002
VPLS 1002
00:01:bd:01:02:05 learned
---
servicing sdp:222:1002
VPLS 1002
00:01:bd:01:02:06 learned
---
servicing sdp:222:1002
Total number of Valid MAC addresses above = 6
parameter
default
vc-id
service-id value
output definitions
Domain
The domain to which the MAC address belongs: VLAN or VPLS.
VLAN/SrvcId
The VPLS ID number associated with the MAC address.