Alcatel-Lucent 6850-48 参照ガイド
Source Learning Commands
OmniSwitch CLI Reference Guide
September 2009
page 17-33
show mac-address-table all count
Displays Source Learning MAC Address Table statistics for both VLAN and VPLS MAC addresses.
show mac-address-table all count
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• This command displays dynamically learned and permanent MAC address for both VLANs and VPLS
services. For more information on VPLS, see the “VPLS Commands“ chapter in this guide.
• Use the show mac-address-table count command to display statistics for VLAN MAC addresses
only.
Examples
-> show mac-address-table all count
Mac Address Table Count:
Permanent Address Count = 0,
DeleteOnReset Address Count = 0,
DeleteOnTimeout Address Count = 0,
Dynamic Learned Address Count = 5,
Static Multicast Address Count = 0,
Permanent VPLS Address Count = 1,
Dynamic Learned VPLS Address Count = 21038,
Total MAC Address In Use = 21044
output definitions
Permanent Address Count
The number of static MAC addresses configured on the switch with a
permanent management status (MAC address is never aged out).
permanent management status (MAC address is never aged out).
DeleteOnReset Address Count The number of static MAC addresses configured on the switch with a
reset management status (MAC address is deleted on the next switch
reboot).
reboot).
DeleteOnTimeout Address
Count
Count
The number of static MAC addresses configured on the switch with a
timeout management status (MAC address ages out according to the
MAC address table aging timer value).
timeout management status (MAC address ages out according to the
MAC address table aging timer value).
Dynamic Learned Address
Count
Count
The number of MAC addresses learned by the switch. These are MAC
addresses that are not statically configured addresses.
addresses that are not statically configured addresses.