Alcatel-Lucent 6850-48 参照ガイド

Learned Port Security Commands

page 18-8

OmniSwitch CLI Reference Guide

Configures the maximum number of MAC addresses that can be filtered on the LPS port(s).

port-security slot/port[-port2] max-filtering number

The slot number for the module and the physical port number on that 
module (e.g., 3/1 specifies port 1 on slot 3).

The last port number in a range of ports you want to configure on the 
same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).

The maximum number of filtered MAC addresses (1–100) that are 
allowed on this port.

By default, the maximum number of filtered MAC addresses that can be learned on an LPS port is set to 5.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

When the number of filtered MAC addresses learned on the port reaches the maximum, either the port is 
disabled (Shutdown Violation mode) or MAC address learning is disabled (Restrict Violation mode). By 
default, MAC address learning is disabled.

-> port-security 1/10 max-filtering 6

-> port-security 1/10-13 max-filtering 18

Release 6.1.5; command was introduced.

learnedPortSecurityTable

lpsMaxFilteredMacNum

Specifies the maximum number of source MAC addresses that an LPS 
port(s) is allowed to learn.

Selects the method for handling traffic that does not comply with LPS 
restrictions for the specified port.