Alcatel-Lucent 6850-48 参照ガイド

Learned Port Security Commands

OmniSwitch CLI Reference Guide

page 18-23

Displays the amount of time during which source learning can occur on all LPS ports. 

N/A

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• The source learning time limit is a switch-wide parameter that applies to all ports that have LPS 

enabled.

• If the shutdown time is set to zero, then a source learning time limit is not active on LPS ports.

• Note that source learning of configured authorized MAC addresses is still allowed after the LPS time 

limit has expired; however, all learning is stopped if the number of MAC addresses learned meets or 
exceeds the maximum number of addresses allowed, even if the LPS time limit has not expired.

-> show port-security shutdown

LPS Shutdown Config       = 2 min

Convert-to-static         = DISABLE

Remaining Learning Window  = 110 sec

Release 6.1; command was introduced.
Release 6.1.5; Convert-to-static and Remaining Learning Window fields added.

The configured amount of time during which the LPS port can learn 
new MAC addresses.

Indicates whether or not dynamic MACs are converted to static MACs 
(enabled or disabled). Configured through the 

 command.

The remaining amount of time during which the LPS port can learn 
MAC addresses.