Alcatel-Lucent 6850-48 参照ガイド

ページ / 3444
Ethernet Port Commands
page 19-22
OmniSwitch CLI Reference Guide
September 2009
interfaces cli-prompt
Enables or disables the display of a confirmation prompt when an interface is administratively disabled 
using the “interfaces admin {up | down}” command.
interfaces cli-prompt {enable | disable}
Syntax Definitions
enable
Enables the display of a confirmation prompt when an interface is 
administratively disabled.
disable
Disables the display of a confirmation prompt when an interface is 
administratively disabled.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• This command is used in conjunction with the 
 command to enable or disable the   
confirmation prompt. 
• By default, the warning prompt will not be displayed.
• If the interface is already operationally down, the warning prompt will not be displayed.
• If a range of interfaces or slots is provided in the interfaces admin down command and the display of 
confirmation prompt is enabled, then the prompt will be displayed irrespective of the operational status 
of the interface.
• The configuration of this command can be captured in the snapshot when the display of the warning 
prompt is enabled.
• The configuration of this command cannot be captured in any interface show commands.
Examples
-> interfaces cli-prompt enable
-> interfaces 1/1 admin down
-> Confirm Command (Y/N) :
-> interfaces cli-prompt disable
-> interfaces 1/1 admin down
parameter
default
enable | disable
disable