Alcatel-Lucent 6850-48 参照ガイド
Ethernet Port Commands
page 19-38
OmniSwitch CLI Reference Guide
September 2009
interfaces hybrid preferred-copper
Configures one or more combo ports to use the copper 10/100/1000 RJ-45 port(s) instead of the fiber SFP
port(s) when both ports are enabled and have a valid link. If the copper port goes down then the switch
will automatically switch to the fiber SFP port.
port(s) when both ports are enabled and have a valid link. If the copper port goes down then the switch
will automatically switch to the fiber SFP port.
interfaces slot[/port[-port2]] hybrid preferred-copper
Syntax Definitions
slot
Slot number you want to configure.
port
Port number of the interface you want to configure.
port2
Last port number in a range of ports you want to configure.
Defaults
All hybrid ports on switches are set to preferred fiber by default. See the
command for more information.
Platforms Supported
OmniSwitch 6400, 6850, 6855
Usage Guidelines
• Refer to the Hardware Users Guide for combo port numbering.
Examples
-> interfaces 1/47 hybrid preferred-copper
-> interfaces 1/47-48 hybrid preferred-copper
-> interfaces 1 hybrid preferred-copper
Release History
Release 6.1; command was introduced.