Alcatel-Lucent 6850-48 参照ガイド

Ethernet Port Commands

page 19-72

OmniSwitch CLI Reference Guide

Displays interface error frame information (e.g., CRC errors, transit errors, and receive errors).

show interfaces [slot[/port[-port2]]] counters errors 

Slot number you want to display.

Port number of the interface you want to display.

Last port number in a range of ports you want to display.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• If no slot/port numbers are entered, counter error information for all slots/ports on the switch is 

displayed.

• You can display a specific interface by entering the slot and port number (e.g., 3/1).

• You can display a range of port numbers (e.g., 3/1-4).

• You can display all interfaces in a slot by entering the slot number (e.g., 3).

• These counters do not apply to Gigabit Ethernet traffic.

• On a combo port configured as either forced fiber or preferred fiber, statistics for the SFP fiber ports 

and not the copper RJ-45 10/100/1000 ports will be displayed. See the 

 command for more information.

• On a combo port configured as either forced copper or preferred copper, statistics for the copper RJ-45 

10/100/1000 ports and not the SFP fiber port will be displayed. See the 

 command for more information.