Alcatel-Lucent 6850-48 参照ガイド

Ethernet Port Commands

OmniSwitch CLI Reference Guide

September 2009

page 19-119

debug interfaces set backpressure

Enables and disables fabric back pressure on a Network Interface (NI) or an entire chassis.

debug interfaces set [slot] backpressure {enable | disable}

Syntax Definitions

slot

The slot number to enable or disable fabric back pressure. The valid
range is 1–8 on an OmniSwitch 9700.

enable

Enables fabric backpressure.

disable

Disables fabric backpressure.

Defaults

Platforms Supported

OmniSwitch 6400, 9000

Usage Guidelines

If the slot number is not specified, then the switch back pressure feature will be enabled or disabled on an
entire chassis.

Examples

-> debug interfaces set backpressure enable

-> debug interfaces set backpressure disable

-> debug interfaces set 3 backpressure enable

-> debug interfaces set 3 backpressure disable

Release History

Release 6.1; command was introduced.

Related Commands

MIB Objects

N/A

parameter

default

enable | disable

disable

Displays whether fabric back pressure is enabled or disabled on an
NI or an entire chassis.