Alcatel-Lucent 6850-48 参照ガイド

GVRP Commands

OmniSwitch CLI Reference Guide

page 22-11

Configures the Join, Leave, or LeaveAll timer values for the switch ports.

gvrp timer {join | leave | leaveall} timer-value {linkagg agg_num | port slot/port}

no gvrp timer {join | leave | leaveall} {linkagg agg_num | port slot/port}

Specifies the

 

value of the Join timer in milliseconds.

Specifies the value of the Leave timer in milliseconds.

Specifies the value of the LeaveAll timer in milliseconds.

The value of the specified timer in milliseconds. The valid range is
1–2,147,483,647 for Join timer, 3–2,147,483,647 for Leave timer, and
3–2,147,483,647 for LeaveAll timer.

The number corresponding to the aggregate group.

The slot number for the module and the physical port number on that 
module (e.g., 3/1 specifies port 1 on slot 3).

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to set the timer for a particular slot or port to the default value.

• GVRP should be enabled on the port before configuring the timer value for that port.

• Leave timer value should be greater than or equal to three times the Join timer value.

• Leaveall timer value should be greater than or equal to the Leave timer value.

• To use the agg_num parameter, the link aggregate group should be created and enabled.

timer-value (join)

600 ms

timer-value (leave)

1800 ms

timer-value (leaveall)

30000 ms