Alcatel-Lucent 6850-48 参照ガイド
VLAN Stacking Commands
page 23-30
OmniSwitch CLI Reference Guide
September 2009
show ethernet-service vlan
Displays a list of SVLANs configured fro the switch.
show ethernet-services vlan [svid1-[svid2]]
Syntax Definitions
svid1
The VLAN ID number identifying the SVLAN (2–4094).
-svid2
The last VLAN ID number in a range of SVLANs that you want to
specify (e.g. 10-12 specifies VLANs 10, 11, and 12).
specify (e.g. 10-12 specifies VLANs 10, 11, and 12).
Defaults
By default, all SVLANs are displayed if an SVLAN or range of SVLANs is not specified with this
command.
command.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Specify a single SVLAN ID or a range of SVLAN IDs to display configuration information for a specific
SVLAN or range of SVLANs.
SVLAN or range of SVLANs.
Examples
-> show ethernet-services vlan
vlan Type name
+--------+------------+-------------------------+
4010 svlan Customer ABC
4011 ipmvlan Video-Service
4020 mgmt Provider Management
4021 svlan Customer XYZ
4030 ipmvlan HBO
-> show ethernet-service vlan 4010
Name : Customer ABC
Traffic Type : svlan
Release History
Release 6.3.1; command was introduced.
output definitions
vlan
The SVLAN ID number identifying the instance.
Traffic Type
The type of SVLAN (svlan = customer traffic, mgmt = management
traffic, or ipmvlan = IP Multicast VLAN traffic).
traffic, or ipmvlan = IP Multicast VLAN traffic).
name
The user-defined text description for the SVLAN. By default, the
SVLAN ID is specified for the description.
SVLAN ID is specified for the description.