Fujitsu dl-3750 ユーザーズマニュアル

Setup Mode

USING SETUP MODE

User's Manual

5-47

Quick

Reference

Introduc-

tion

Setting Up

Paper

Handling

Printing

Setup Mode

2. Select the CONFIG function.

Repeatedly press the LOAD button or the LF/FF button to position

the red cursor under CONFIG. Press the MENU button to select the

CONFIG function and print the following <TEAROFF> options:

<TEAROFF> MANUAL AUTO

3. Select an option.

Press the LOAD button or the LF/FF button to move the cursor to

either MANUAL or AUTO. Press the MENU button to select the

option and print the <TEARPOS> item. If other items must be

specified, do so now. Otherwise, go to step 4.

4. Exit the CONFIG function.

Press the ONLINE button to exit the CONFIG function and reprint

the <<FUNCTION>> menu.

5. Do either of the following:

•

Select another function, or

•

Exit setup mode, saving your changes.

For details on other functions, see the other sections in this chapter.

To exit setup mode and save your changes, make sure that the red

cursor is positioned under SAVE & END, then press the MENU

button or the TEAR OFF button.

Procedure

To change the printer configuration options, make sure that continuous

forms paper is loaded and then proceed as follows:

1. Enter setup mode.

Press the TEAR OFF button and the ONLINE button simultaneously

until the printer beeps. Wait for the printer to stop printing and

check that the following <<FUNCTION>> menu is printed:

<<FUNCTION>>

SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP

V-ALMNT