Franklin sme-106 ユーザーガイド
17
Changing the Battery
This product uses one CR2032, 3-volt lithium bat-
tery. The battery should be changed when the
screen contrast is too light even after adjustment.
tery. The battery should be changed when the
screen contrast is too light even after adjustment.
Before you replace the battery, you should have a
new battery and a small Phillips screwdriver on
hand.
new battery and a small Phillips screwdriver on
hand.
Warning! If the battery completely loses power, all
the information stored in the phone list will be per-
manently lost. Furthermore, any time that you
change the battery, you risk losing all your phone
list information, so always keep
the information stored in the phone list will be per-
manently lost. Furthermore, any time that you
change the battery, you risk losing all your phone
list information, so always keep
written copies of
your phone list information.
1. Using a Phillips screwdriver, unscrew and re-
move the back cover.
2. Install a new battery, with its plus sign (+) fac-
ing you.
3. Replace the back cover.
✓
Disabling the Demonstration
After changing the battery, the automatic dem-
onstration may appear when you turn on the
unit. To stop the demonstration, press
onstration may appear when you turn on the
unit. To stop the demonstration, press
CLEAR
.
To disable the demonstration, type
✽✽
d at the
Enter a word screen and then press
ENTER
.