Fujitsu fi-6130 ユーザーガイド
fi-6130/fi-6230 Image Scanner Getting Started
AP-3
Appendix3
REPLACING CONSUMABLES
■ Consumables and Replacement
Cycles
The followings are the specifications of consumables and
their recommended replacement cycles.
their recommended replacement cycles.
To purchase consumables, contact the store where you pur-
chased the scanner or an authorized FUJITSU scanner service
provider.
chased the scanner or an authorized FUJITSU scanner service
provider.
The replacement cycles above are rough guidelines when
using A4/Letter woodfree or wood containing paper 64 g/m
using A4/Letter woodfree or wood containing paper 64 g/m
2
(17 lb). This cycle varies according to the type of the paper
used and how frequently the scanner is used and cleaned.
used and how frequently the scanner is used and cleaned.
The following illustrations show the locations of the consum-
ables. For details, refer to chapter 5 "REPLACING CON-
SUMABLES" of "fi-6130/fi-6230 Operator’s Guide" on the
Setup CD-ROM.
ables. For details, refer to chapter 5 "REPLACING CON-
SUMABLES" of "fi-6130/fi-6230 Operator’s Guide" on the
Setup CD-ROM.
■ Replacing the Brake Roller
■ Replacing the Pick Roller
CAUTION
During its operation, the inside glass of the ADF
becomes very hot.
becomes very hot.
Before replacing the consumables, turn its power off
and unplug the AC adapter from the outlet. Wait at
least 15 minutes.
and unplug the AC adapter from the outlet. Wait at
least 15 minutes.
Description
Parts No.
Standard
Replacement Cycle
Brake roller
PA03540-0001 After 200,000 sheets or
one year
Pick roller
PA03540-0002 After 200,000 sheets or
one year
ATTENTION
Use only the designated consumables.
2
3
1
1
2
3