Fujitsu pds4204 ユーザーガイド

The current viewing mode is

displayed.

Pressing the WIDE button moves

the mode to the next item as

below.

When AUTO is selected, the wide

screen is automatically selected

according to the contents of the

video.

Example: NORMAL mode

Example:  When AUTO is selected,

W i t h   c e r t a i n   s o f t w a r e ,   t h e

Plasmavision may not operate cor-

rectly in AUTO mode. If so, use the

WIDE button to switch to the most

appropriate screen size.

• Some game software will invoke

the zoom screen (where the top

and bottom of the screen are miss-

ing).

• For some 4:3 video software, in

scenes where the top and bottom

are extremely dark, the display

may switch to the zoom screen.

• For video software that switches

to the zoom screen automatically,

the display may take a few mo-

ments to switch to the zoom screen

for the first dark scene.

∗

 AUTO mode cannot be selected in COMPONENT VIDEO mode.

In AUTO mode, the contents of the video software are detected and the display
switches to the optimum wide screen as follows:

• WIDE 1
The appropriate wide screen for ordi-
nary video (4:3) software.

• WIDE 2
Appropriate for 16:9 video compressed
to horizontally wide 4:3 video.

• ZOOM 1
Appropriate for horizontally wide video
software; a normal picture appears
with the top, bottom, left, and right
enlarged.

• ZOOM 2
For horizontally wide video software
with subtitles, the display is automati-
cally adjusted to compress the subtitle
section so that it is not cut out.

ZOOM 1

ZOOM 2

Wide screen

∗

This operation can also be done

using the buttons on the Display’s

operation panel.

Vertically wide video

Horizontally wide video

Horizontally wide video
with subtitles
   NORMAL mode

Ordinary video (4:3 video)

WIDE 1

WIDE 2