AvMap ekp iii c ユーザーズマニュアル
20
EKP III USER MANUAL
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “GENERAL SETUP” + ‘ENTER’ + “LAN-
GUAGE” + ‘ENTER’
GUAGE” + ‘ENTER’
Choose the language you want and press ‘ENTER’ again to confirm.
2.5 EXTERNAL CONNECTIONS
2.5.1 INTERNAL/EXTERNAL GPS SOURCE
The EKP-III has an internal GPS Receiver. Be sure the Fix Source is set to Internal GPS to
receive data from this internal receiver.
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “FIX
SOURCE” + ‘ENTER’
SOURCE” + ‘ENTER’
Choose Internal GPS and press ‘ENTER’ to confirm.
Otherwise if the EKP-III is using an external NMEA0183 positioning source, set the
Fix Source as External NMEA0183. The recognized Input NMEA0183 messages are the fol-
lowing: GGA, GLL, GSA, GSV, HDG, HDM, HDT, PCMPA, RMC, VHW, VTG (see
Appendix F for more details on NMEA sentences).
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “FIX
SOURCE” + ‘ENTER’
SOURCE” + ‘ENTER’
Choose External NMEA0183 and press ‘ENTER’ to confirm.
Fig. 2.5.1 - External Input
2.5.2 NMEA OUTPUTS
The EKP-III can be connected to external equipment that accepts NMEA0183 data input.
Once attached, the output of NMEA formatted position information can be enabled in the
following manner:
Once attached, the output of NMEA formatted position information can be enabled in the
following manner:
>‘MENU’ 1 sec. + “COMMUNICATIONS” + ‘ENTER’ + “NMEA OUTPUT” + ‘ENTER’