AvMap ekp iii c ユーザーズマニュアル

A Warning window will appear to confirm deletion: press ‘ENTER’ to confirm,

‘ESC’ to abort.

The Flight Plans stored in the EKP-III memory can be automatically reversed by:

The message “DONE” will appear to the right of the menu selection and the sequence

of the Waypoints change immediately on the screen.

A GoTo Flight Plan is a one leg direct Flight Plan to a specified Database object or cursor posi-

tion on the Moving Map.

To activate a GoTo Flight Plan within a Database page (see Chapter 8) press ‘GOTO’. Doing

this will deactivate the current Flight Plan and redraw the screen to the Moving Map page. All

navigation information is now related to this object.

To Deactivate the GoTo Flight Plan, from the Moving Map screen press ‘GOTO’. A

GoTo Menu box will appear with the option to deactivate. Pressing “DEACTIVATE FP” will

cancel the navigation data and place the EKP-III in a Plotter Mode without an active Flight Plan.

If a Flight Plan was active prior to the GOTO, the Flight Plan will resume as active.

To activate a GoTo Flight Plan from the Moving Map, press ‘GOTO’. A “GoTo” Menu box

will appear on  the screen. You can select the current cursor position or select a Database

object category. When selecting the Database category, the Database menu will appear (see

Chapter 8 for details on searching the Database Menu). Once the desired object has been

found, press ‘GOTO’ to activate.

52

EKP III USER MANUAL