AvMap ekp iii c ユーザーズマニュアル

After pressing  ‘ENTER’ a box will appear with 00. Using the cursor keys select the

number desired and press ‘ENTER’. The default setting is Off (00).

Specifies the radius of a circle around the User Waypoint: when your aircraft reaches a point

within this circle an alarm sounds and the Waypoint Alarm box apprears on the screen.

Note: The alarm is only active for User Waypoints with this symbol selected for the

icon: “alarm logo”

To set the alarm:

‘MENU’ 1 sec + ‘MENU’ + “ALARM SETUP” + ‘ENTER’ + “AIRSPACE AHEAD

ALARM” + ‘ENTER’

After pressing ‘ENTER’ a box will appear with 00.00. Using the cursor keys, select the

number desired and press ‘ENTER’.

The default setting is OFF (00.00).

If your projected track will cross an airspace sector, an alarm will sound and a warning box will

appear on the screen. If there is an altitude limitation to the airspace, we will display an alarm

if your current altitude is within 500 feet of the limitations.

To set the time interval for the alarm:

After pressing ‘ENTER’ a box will appear with 00.00. Using the cursor keys, select

the number desired and press ‘ENTER’.

The default setting is OFF (00.00).

IN addition, you can select the category of airspace associated with the alarm.

To select the categories:

Use the arrow keys to select each category of airspace and turn ON/OFF the alarm for that

category. The time interval set above is for all airspace selected as ON.

The Event Log page contains information on Event as Power On, Power Off, GPS Fix Lost,

and so on. For each Event, the Event name, Time and Date are shown.

To Select the Event LOG page:

EKP III USER MANUAL

89