Genz-Benz shen-cpk-10t ユーザーガイド

•  Ultra Lightweight Compact Designs   

   •  SMPS/Class D Power Amplification Technology

•  Two Pre Amp Channels w/Active EQ   

   •  Neodymium Loudspeaker and Compression Tweeter

•  Input Phase Reverse Switch   

 

   •  24-Bit Studio Quality Digital Effects   

•  Phantom Power for Condenser Mics   

   •  Bottom-mounted Tilt Foot

 

 – The Shenandoah Compak 300 series of acoustic amps delivers warm, rich tone 

and phenomenal output in surprisingly compact, lightweight cabinets.  Each model produces 175 watts as a combo 

and 300 watts with an 8 ohm extension cabinet.  The amplifier is configured as a 2 channel – 3 input platform and 

each channel is equipped with a ¼” unbalanced line input.  Channel 2 offers an XLR balanced microphone input 

(with phantom power) as well.  Inputs on each channel are summed (mixed) together at a 1:1 ratio, so they can all 

be used simultaneously.  Each channel then passes through independent 3 band equalizers with a sweepable 

midrange frequency. Equalization centers were carefully selected for use with acoustic instruments. Each channel 

also contains individual send controls to the on-board 24-bit 15 program digital effects circuit. The back panel 

contains 3 direct outputs with ground lift switch, an effects loop, auxiliary input, headphone jack, tuner out, effects 

cancel jack, and 2-1/4” speaker jacks. 

1