Fantom Drives mtt160 インストール手順

Connecting the Drive

to Your Computer

Connect the USB power passthrough connector to a

free USB port, followed by the USB Signal connector of

the included USB cable to another free USB ports on

your PC or USB hub (See USB cable picture on page 7.)

Connecting both USB connectors is required to provide

sufficient power for the drive to operate. Do NOT Plug the Signal
connector into the Power Passthrough connector.

Connect the Firewire cable to your computer's FireWire

port. FireWire plugs are shaped so they can only

be properly inserted one way. Be sure to insert the

plugs properly or you may damage the Drive and void

the warranty. The Drive has two FireWire ports for

connecting another FireWire device in a daisy chain. You can use

either port to connect the Drive to your computer.

The Drive should power up and be ready for use automatically. If

the LED blinks and drive does not mount on the host operating

system, your host bus may not be providing sufficient power for the

drive. Please make sure both signal and power USB connectors are

attached (USB) or your FireWire host connection is powered. While

most 6 pin IEEE1394 FireWire host busses, powered USB ports,

and powered USB hubs should supply sufficient power to operate,

Underpowered USB host busses as well as IEEE1394-2000 4

pin FireWire connections may require an external power supply

(optional)