Conairphone tcr200 オーナーマニュアル

1. Press and hold [TIME] and [HOUR] controls

simultaneously. Release when correct hour is
displayed.

2. Press and hold [TIME] and [MINUTE] controls

simultaneously. Release when correct minute is
displayed.

NOTE: The clock used in this unit has a 12-hour display,
so make certain the proper AM indicator is displayed.
A small lighted dot appears to indicate AM.

1. Press and hold [ALARM] and [HOUR] controls

simultaneously. Release when correct hour is
displayed.

2. Press and hold [ALARM] and [MINUTE] controls

simultaneously. Release when correct minute is
displayed.

NOTE: Always press the [ALARM] before pressing the
[HOUR] or [MINUTE]. After the desired time is set,
always release the [HOUR] or [MINUTE] first, before
releasing the [ALARM].

1. Place handset in cradle.
2. Slide ON/OFF/MUSIC/ALARM switch to the ON

position.

3. Slide AM/FM switch to desired band.
4. Rotate tuning control to desired station.
5. Adjust the volume control to desired level.
6. Slide ON/OFF/MUSIC/ALARM switch to OFF to turn

radio off.

NOTE: This unit has an automatic mute feature to
silence the radio whenever the telephone is in use. If
the radio is on and you lift the handset, the volume will
be turned off automatically. The volume will resume
once handset is returned to cradle.

1. Set Alarm Time.
2. Slide ON/OFF/MUSIC/ALARM switch to the ON

position.

3. Set the AM/FM switch to AM or FM for desired radio

band.

4. Rotate the radio tuning dial to select desired

broadcast station on the Lighted Radio Dial Display.
Tune station for maximum clarity.

5. Adjust the volume control for the desired listening

level.

6. Slide ON/OFF/MUSIC/ALARM switch to MUSIC. A

small lighted dot appears to indicate ALARM. The
radio is now set to turn on automatically at the time
selected by the alarm.
NOTE: The radio will play for approximately two
hours and turn itself off automatically. This cycle will
repeat every 24 hours unless the controls are
changed. To play the radio after the 2-hour period,
set the ON/OFF/MUSIC/ALARM switch to ON.
Remember to reset the switch to MUSIC so the radio
will come on automatically the next day.

7. To reset the alarm, press the [ALARM RESET]. This

will automatically shut the radio off. The radio will
come on again the next day at the same time.

8. Slide the ON/OFF/MUSIC/ALARM switch to OFF

to completely turn the radio off.

Set switch to your type of service. If you don’t know
whether you have tone or pulse:
1. Put the switch on “TONE”.
2. When you have a dial tone, press any key on the

keypad. If the dial tone stops, leave it on “TONE”. If
not, change the setting to “PULSE”.

The Receiver Volume Control is located on the side of
your handset. This enables you to adjust the receiver
volume on your telephone handset from normal to high
for a more comfortable listening level.

Your TCR200 features a harmonic dual tone ringer that
can be adjusted from a loud (HI) to a soft (LO) sound
level. When you don’t want to be disturbed, slide the
switch to the OFF position. You can still make outgoing
calls without being disturbed by incoming calls.

To talk to someone on your end of the phone without
the caller hearing your conversation, press and hold
the [MUTE]. Release the [MUTE] to return to your
telephone conversation.

Automatically redials the last number called. If the
number was busy or unanswered:
a. Hang up the HANDSET on the base (or depress

the hook switch or [RESET]).

b. Lift the HANDSET (or release the hook switch).
c. Press [REDIAL].

The Conairphone

TM

 is compatible with inductively

coupled hearing aids.

1. Set Alarm Time.
2. Slide ON/OFF/MUSIC/ALARM switch to ALARM.

A small lighted dot appears to indicate ALARM. The
alarm is now set to turn on automatically at the time
selected by the alarm.
NOTE: The alarm will sound for approximately two
hours and turn itself off automatically. This cycle will
repeat every 24 hours unless the controls are
changed. To turn off the buzzer and turn on the radio,
slide the ON/OFF/MUSIC/ALARM switch to MUSIC
and rotate the volume control and adjust for desired
volume level. To play the radio after the 2-hour
period, set the ON/OFF/MUSIC/ALARM switch to
ON. Remember to reset the ON/OFF/MUSIC/
ALARM switch to ALARM so the alarm will sound
automatically the next day.

3. Press the [ALARM RESET] to turn the alarm off

completely. The alarm will come on again the next
day at the same time.

If you wish to sleep a few extra minutes after your alarm
sounds, press the SNOOZE control. This will silence
the radio or alarm. The radio or alarm will sound again
9 minutes later. You can use the SNOOZE feature
repeatedly for up to approximately two hours.

The SLEEP control feature lets you turn the radio on
for up to about two hours while you doze off to your
favorite radio program.
1. Set the ON/OFF/MUSIC/ALARM switch to OFF,

MUSIC or ALARM position as desired.

2. Press the [SLEEP] once, the radio will play for 59

minutes. Hold the [SLEEP] and press [MINUTE] will
decrease the playing time.

3. Release the [MINUTE] when the desired length of

time is displayed on the clock.

9

10

11

12