RCA L32WD26D ユーザーガイド

Enter channel numbers and time settings directly through the remote control.

To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits. To enter
a three-digit channel, press and hold the “1” button until “1” and two dashes (– –) appear, then add the
second two digits. Example: to tune to channel 123, press and hold 1 until “1– –” appears, release the 1
button and then press 2 and 3.

Used to point to different items in the TV or DVD menu and to adjust the menu controls. Moves

the PIP window when no menus are on the screen. Also switches the two POP windows when no menus
are on the screen. For Zoom use, go to next page.

Puts the remote in AUX mode. Can also be programmed to operate most brands of an additional

remote-controllable component.

Backlight  Lights up some of the buttons in the dark.

In TV mode, scans up or down through the current channel list. Press once to change the

channel up or down; press and hold to continue changing channels. In DVD mode while a disc is playing,
CH+ advances to the next chapter; CH- goes to the preceding chapter.

When using PIP or POP, changes the channel in the picture window.

Removes any menu or display from the screen and returns you to normal viewing.

DISC MENU In DVD mode while a disc is playing, brings up the DVD Disc menu.

DVD  Turns on the DVD and puts the remote in DVD mode. Also displays current DVD status.

In DVD mode, advances the disc forward.

When watching TV, freezes the picture until you press another button to resume normal TV

viewing.

In TV mode, returns you to the previous channel. In DVD mode, returns to the previous screen.

In TV mode, brings up the Channel Guide menu. In DVD mode, brings up DVD guide, if available.

Indicates the programming mode when programming the remote to control components.

In TV mode, brings up TV status display; press again to clear the screen. In DVD mode, brings up

the Info Display.

Press to toggle through the available input sources (VID1, VID2, FRNT, CMP1, CMP2 and DVI. Press

the CH+ or CH- button to resume TV viewing).

In TV mode, brings up the TV Main menu. In DVD mode, brings up a reduced TV Menu.

Reduces the TV’s volume to its minimum level. Press again to restore the volume.

When in the menu system, selects highlighted items. When watching TV, freezes the picture

until you press another button to resume normal TV viewing.

When in TV mode, turns the TV on and off. If in another device mode (VCR, DVD, SAT•CABLE,

etc.) and programmed, will turn the device on and off.

In DVD mode, pauses the disc.

Press once to bring up the small picture-in-picture window. Press again to bring up the picture-

outside-picture (POP) windows. Press to remove POP. (See Chapter 4 for more information about using
PIP.)

In DVD mode, plays the disc.

If your TV/DVD is connected to a VCR, records TV programs .

In DVD mode, goes backward on a disc.

Puts the remote in SAT•CABLE mode and, if Autotuning is enabled, will turn on the TV and

tune to the correct input channel.

Press once before changing channels and the TV will wait 30 seconds before returning you to the

original channel. Press repeatedly to add more time.

In TV mode, displays the Picture and Sound preset settings at the bottom of the TV. In DVD

mode while a disc is playing, displays the DVD Info Display with the Audio icon highlighted.

In DVD mode, stops playing the disc. Press and hold for 3 seconds to open the disc tray.

When using PIP, swaps the main picture with the PIP window. When using POP, swaps the left

and right pictures.

STOP

PAUSE

TV

ON OFF

AUX

DVD

SAT CABLE

PIP SWAP

CH +

CH  -

PLAY FORWARD

REVERSE

GUIDE

GO  BACK

CH

+

CH

-

VO

L

VO

L

SKIP

MUTE

INFO

MENU

CLEAR

DISC MENU

SOUND ANT

1

2

3

4

5

6

7

8

9

0

INPUT

VCR1

VCR2

OK

RECORD

PIP

ZOOM-

ZOOM+

FREEZE