Printronix L5020 ユーザーズマニュアル
Cleaning The Fuser Unit Cover Glass
159
3.
Open the waste toner recovery unit.
CAUTION
The transfer charger must be in the down position to avoid
scratching the drum. Failure to perform steps 4 and 5 damages
the drum.
scratching the drum. Failure to perform steps 4 and 5 damages
the drum.
4.
Rotate the transfer elevator drive shaft counterclockwise.
Watch the charger movement:
Watch the charger movement:
a.
If the charger starts to move up, it is already in the down
position.
position.
b.
If the charger starts to move down, continue to rotate the
drive shaft until the charger reaches the complete down
position.
drive shaft until the charger reaches the complete down
position.
Legend:
1)
Transfer Charger
2)
Transfer Elevator Drive Shaft
CAUTION
To avoid damaging the printer or causing false paper jams, the
transport lever must be in the fully down position before
closing the transport unit.
transport lever must be in the fully down position before
closing the transport unit.
5.
Lower the transport surface by turning the green lever on the
transport unit to the left.
transport unit to the left.
1
2