Printronix L5020 ユーザーズマニュアル
Chapter 2
Powering On The Printer
32
5.
Turn on the printer by setting the power switch to | (on). When
you power on the printer, the following occurs:
you power on the printer, the following occurs:
a.
The printer reads the emulation boot file and displays the
message:
H0: TEST HARDWARE
PLEASE WAIT...
message:
H0: TEST HARDWARE
PLEASE WAIT...
b.
The ONLINE indicator lights continuously and STAND BY
goes out.
goes out.
NOTE: The printer can be set to power on in the OFFLINE state
instead of the ONLINE state. To print, ONLINE must be lit;
if it is not, press ONLINE.
if it is not, press ONLINE.
If other messages and prompts appear on the control panel,
answer the prompts and follow the directions as explained on page
188.
answer the prompts and follow the directions as explained on page
188.