Printronix L1524 ユーザーズマニュアル
106
Chapter
3
Operator Panel
Message Display
The message display shows what is displayed on the physical operator panel.
Use the message display to configure menu options and read error
messages.
Use the message display to configure menu options and read error
messages.
Status Indicator
The status indicator displays the current operating mode:
Online mode: The indicator displays bright green.
Offline mode: The indicator displays black.
Fault mode: The indicator flashes.
Disabled Indicator
Normally, when you control the printer via the operator panel, the Disabled
light is off, and the Enable button underneath the status indicator is grayed
out. While the remote management software has control of the physical
operator panel, the message PRINTER UNDER REMOTE CONTROL
appears on the physical operator panel to alert others that the printer is being
controlled remotely.
light is off, and the Enable button underneath the status indicator is grayed
out. While the remote management software has control of the physical
operator panel, the message PRINTER UNDER REMOTE CONTROL
appears on the physical operator panel to alert others that the printer is being
controlled remotely.
However, if someone presses a key on the printer, the virtual operator panel
disables. The Disabled indicator lights up, and the Enable button activates.
Click the Enable button to give control of the printer back to the virtual
operator panel.
disables. The Disabled indicator lights up, and the Enable button activates.
Click the Enable button to give control of the printer back to the virtual
operator panel.
In Progress Indicator
This light flashes when the printer is working on a job or moving paper.