Printronix L1524 ユーザーズマニュアル
The Menu Bar
45
Set Wireless Properties
NOTE: For a more thorough description of these settings, refer to the
Network Interface Card User’s Manual.
To set wireless properties, select a wireless printer from the printer database
then select UtilitiesSet Wireless Properties.
then select UtilitiesSet Wireless Properties.
The Wireless Properties dialog box contains four tabs: General, WEP
Encryption, Kerberos, and LEAP.
Encryption, Kerberos, and LEAP.
Figure 36. Wireless Properties: General Tab
General Tab
You must click Read to obtain the printer’s settings before you can modify
them.
them.
NOTE: If the NIC has a password assigned to the user guest, then a Telnet
Guest Password is required. See “Security Tab” on page 67.
SSID (Service Set Identifier): A 1 to 32 case sensitive character string that
identifies the SS network that the printer with a wireless NIC is a part of.
identifies the SS network that the printer with a wireless NIC is a part of.
Network Mode: Determines if the client communicates using an access point
(Infrastructure) or other clients peer to peer (Ad Hoc).
(Infrastructure) or other clients peer to peer (Ad Hoc).
Antenna Diversity: The NIC supports a single (Primary and Auxiliary) and
dual (Diverse) antenna mode.
dual (Diverse) antenna mode.
Power Saver Mode: Determines if the NIC will go into a power saving mode
(Modes 1 through 5) or stay powered up (CAM: Continuous Access Mode).
(Modes 1 through 5) or stay powered up (CAM: Continuous Access Mode).
Authentication: Determines the authentication scheme: Open, Shared,
Kerberos, or LEAP.
Kerberos, or LEAP.
Open system authentication allows all devices that have the authentication
algorithm number for open system to authenticate.
algorithm number for open system to authenticate.