Printronix SL4M ユーザーガイド
Power Switch
37
Controls And Indicators
Power Switch
The power switch is located on the bottom front panel of the printer. To apply
power, place the switch in the | (On) position. When you first power on the
printer, a series of initialization messages will appear on the LCD (Liquid
Crystal Display) on the control panel.
power, place the switch in the | (On) position. When you first power on the
printer, a series of initialization messages will appear on the LCD (Liquid
Crystal Display) on the control panel.
To remove power, place the power switch in the O (Off) position.
Powering On The Printer
When you power on the printer, it executes a self-test. During the self-test, the
LCD momentarily displays the DPI resolution (203 or 305 DPI) of the installed
printhead. The default power-on state is online. Once the printer has
successfully initialized, the ONLINE status indicator light illuminates, and the
LCD indicates ONLINE, the printer model (SL4M/T4M), the printhead installed
(203 or 305 dpi), the communication interface, and the emulation selected.
LCD momentarily displays the DPI resolution (203 or 305 DPI) of the installed
printhead. The default power-on state is online. Once the printer has
successfully initialized, the ONLINE status indicator light illuminates, and the
LCD indicates ONLINE, the printer model (SL4M/T4M), the printhead installed
(203 or 305 dpi), the communication interface, and the emulation selected.
If there is a fault during the self-test, the FAULT (!) status indicator flashes,
and a fault message appears on the display. The alarm may also sound, if
configured to do so.
and a fault message appears on the display. The alarm may also sound, if
configured to do so.