Printronix SL4M ユーザーガイド
92
Chapter
4
EMULATION MENU
Mark TOF Detect
Allows the user to select which edge of the black line is used for TOF (Top Of
Form). The leading edge refers to the first edge seen by the media sensor as
the media feeds out of the printer or the start of the black line.
Form). The leading edge refers to the first edge seen by the media sensor as
the media feeds out of the printer or the start of the black line.
•
Mark Trail Edge (factory default). Trailing edge or end of black line
denotes TOF.
denotes TOF.
•
Mark Lead Edge. Leading edge or start of black line denotes TOF.
NOTE: This option applies only when Gap/Mark Sensor is set to Mark.
EMULATION MENU
Overview
This section covers the following emulations:
•
PGL (page 94)
•
ZGL Config. (Refer to the
Printer Protocol Interpreter (PPI) ZGL
Programmer’s Reference Manual.)
•
TGL Config. (Refer to the
Printer Protocol Interpreter (PPI) TGL
Programmer’s Reference Manual.)
•
IGL Config. (Refer to the
Printer Protocol Interpreter (PPI) IGL
Programmer’s Reference Manual.)
•
STGL Config. (Refer to the
Printer Protocol Interpreter (PPI) STGL
Programmer’s Reference Manual.)
•
DGL Config. (Refer to the
Printer Protocol Interpreter (PPI) DGL
Programmer’s Reference Manual.)
•
IEGL Config. (Refer to the
Printer Protocol Interpreter (PPI) IEGL
Programmer’s Reference Manual.)
•
MGL Config. (Refer to the
Printer Protocol Interpreter (PPI) MGL
Programmer’s Reference Manual.)
You can select emulation default parameters directly from the control panel, or
by control codes as explained in the appropriate Programmer's Reference
Manual.
by control codes as explained in the appropriate Programmer's Reference
Manual.
IMPORTANT
BEFORE you reconfigure an emulation, print a configuration sheet to
see all current settings.
see all current settings.
PGL
The PGL emulation is the software based Printronix Graphics Language
(PGL) for the Printronix thermal printer family. It is based upon, and
compatible with, the IGP-100/200/400 board. It includes the following
features:
(PGL) for the Printronix thermal printer family. It is based upon, and
compatible with, the IGP-100/200/400 board. It includes the following
features: