Printronix SL5000r ユーザーズマニュアル

305

Both of these test procedures are covered in this chapter. Configuration items 
to check include the following:

•

Check that the data string being sent to the printer contains the correct 
information.

•

Verify that the correct host interface port is being used and that the 
communication parameters match those of the host (e.g., baud rate, 
parity, etc.).

•

Verify that the correct interface cable is installed between the host and the 
printer.

The printer will not function properly with an incorrectly wired cable or the 
wrong interface cable installed. If the cable is suspect, contact Printronix or 
your authorized service representative.

When the printer is first powered up, it will reset itself to the communication 
default parameters. The parameters are listed in the following table:

The printer interface configuration settings may be entered from the control 
panel. See Chapter 3, “Configuring The Printer” for complete instructions.

Baud

9600

Data Bits

8

Parity

NONE

Stop Bits

1