Printronix SL5000r ユーザーズマニュアル

 31

NOTE: The software turns on the amber status LED at power-up. If a 

hardware problem is detected at power-up the amber LED will blink 
continuously.

The hardware turns on the green LED at power-up. If a problem is 
detected with the software stored in the printer’s flash memory both 
the amber and green LEDs will alternately blink continuously.

Under normal conditions, both LEDs remain on continuously.

If your printer is equipped with the optional Coax/Twinax optional RS-422 
and optional Network Interface Card (NIC), the rear I/O panel will appear 
as illustrated below.

NOTE: The printer does not support simultaneous connection of the coax 

and twinax interfaces using the Auto Switching feature. Auto 
Switching is described on page 295.

RS-422

NIC Connection

Coax Connection

Twinax Connection