Printronix L5520 補足マニュアル
176030-001A
1 of 2
L5520/L5535
Stacker Addendum
Stacker Addendum
Overview
This Addendum describes tips for using and preventing jams in the
L5520/L5535 Stacker.
L5520/L5535 Stacker.
Using The Stacker
1.
Before you start your print job, make sure the stacker tray is at the top
position by manually pushing it up as far as it will go.
position by manually pushing it up as far as it will go.
2.
Send your print job from the control panel, then immediately go to the
stacker tray.
stacker tray.
3.
As the paper exits the printer, it passes through the paper guide rollers
located at the top rear of the stacker. You must manually position the
paper so it will stack along its natural fold. If the first fold is correct, the
paper will continue to fold correctly and lay flat.
located at the top rear of the stacker. You must manually position the
paper so it will stack along its natural fold. If the first fold is correct, the
paper will continue to fold correctly and lay flat.
Natural Fold
of Paper
of Paper
Paper Guide
Rollers
Rollers
Stacker Tray