Blodgett MT1828G 仕様ガイド
BLODGETT OVEN COMPANY
www.blodgett.com
1400 Toastmaster Drive, Elgin, IL USA 60120 • Phone: (847) 741-3300 • Fax: (847) 741-0015
MODEL MT1828G
SHORT FORM SPECIFICATIONS
Provide Blodgett conveyor model MT1828G conveyor oven. Unit shall be gas heated and shall cook by means of forced, heated air. Unit shall be (single/double/triple) deck supported
by (specify stand type from options list). Each deck shall be fully independent, of stainless steel construction, and fully insulated on all sides. Provide with gas heated baking compart-
ment with two blowers to evenly distribute heat across baking zone. Conveyor belt shall be 18" (457mm) wide and constructed of stainless steel wire mesh; baking zone length shall be
28" (711mm). Side mounted control panel shall be solid state with 600°F (315.5°C)maximum thermostat and digital display of adjustable belt speed. Provide start-up inspection serv-
ice by a factory authorized service agent. Provide options and accessories as indicated.
Provide Blodgett conveyor model MT1828G conveyor oven. Unit shall be gas heated and shall cook by means of forced, heated air. Unit shall be (single/double/triple) deck supported
by (specify stand type from options list). Each deck shall be fully independent, of stainless steel construction, and fully insulated on all sides. Provide with gas heated baking compart-
ment with two blowers to evenly distribute heat across baking zone. Conveyor belt shall be 18" (457mm) wide and constructed of stainless steel wire mesh; baking zone length shall be
28" (711mm). Side mounted control panel shall be solid state with 600°F (315.5°C)maximum thermostat and digital display of adjustable belt speed. Provide start-up inspection serv-
ice by a factory authorized service agent. Provide options and accessories as indicated.
DIMENSIONS:
Floor space:
35" (889mm) wide x 50" (1270mm) long
Product clearance:
3.75" (95.25mm)
Belt width:
18" (457mm)
Baking zone length:
28" (711mm)
GAS SUPPLY
(specify): Natural
Propane
Single
3/4" NPT
3/4" NPT
Double stack
3/4" NPT
3/4" NPT
Triple stack
3/4" NPT
3/4" NPT
MAXIMUM INPUT (BTU/hr):
MT1828G
Single:
Single:
40,000
Double stack:
80,000
Triple Stack:
120,000
Gas Pressures:
Minimum
Minimum
4.5" W.C. for natural gas or propane
Maximum
10.5" W.C. for natural gas or propane
CE Minimum
4.5" W.C. for natural gas
11.0" W.C. for propane gas
CE Maximum
10.5" W.C. for natural gas
13.0" W.C. for propane gas
POWER SUPPLY:
(with dedicated ground)
Domestic Model:
120/208-240 VAC, 1 Phase, 60 Hz, 5 amp, 3 wire with ground
Export Model:
220-240 VAC, 1 Phase, 50 Hz., 5 amp, 2 wire with ground
120/208-240 VAC, 1 Phase, 60 Hz, 5 amp, 3 wire with ground
Export Model:
220-240 VAC, 1 Phase, 50 Hz., 5 amp, 2 wire with ground
MINIMUM ENTRY CLEARANCE:
Uncrated
18" (457mm)
Crated
25" (635mm)
COMBUSTIBLE WALL CLEARANCE:
Gas
0”
SHIPPING INFORMATION:
Approx. Weight:
Crated
Uncrated*
Single:
450 lbs. (204 kg)
320 lbs. (145 kg)
Double stack:
900 lbs. (407 kg)
640 lbs. (291 kg)
Triple stack:
1350 lbs. (611 kg)
960 lbs. (436 kg)
*Add: 140 lbs. (64 kg) when ordered with stand and frame.
Crate size:
58" L x 24" W x 54" H (1473 x 610 x 1372 mm)
58" L x 24" W x 54" H (1473 x 610 x 1372 mm)
Printed in U.S.A.
NOTE: FOR COMMERCIAL USE ONLY
APPROVAL/STAMP
P/N M9989 Rev L (5/07)
NOTE: Blodgett Oven, in accord with its policy to continually improve its products, reserves the right to change materials or specifications without
notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased
equipment.
notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased
equipment.