Printronix P5000 ユーザーズマニュアル
ADAPTER PARAMS
261
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be
available. The selections are as indicated below:
available. The selections are as indicated below:
•
Enable (default). Makes the NetBIOS protocol available with
the ethernet installed.
the ethernet installed.
•
Disable. Makes the NetBIOS protocol unavailable during
printer operation.
printer operation.
Novell Frame
This selection determines which framing scheme will be used in
processing Novell signals.
processing Novell signals.
•
Auto Sensing (default)
•
Ethernet II
•
Ethernet 802.3
•
Ethernet 802.2
•
802.2 Snap
ASCII Data Port
This option sets the port number for ASCII print jobs. The data port
number needs to match your host system setting.
number needs to match your host system setting.
•
9100 (default)
•
0 - 65535
Keep Alive Timer
This is the time that the Keep Alive Timer will run. With the Keep
Alive Timer on, the tcp connection will stay connected even after
the print job has terminated.
Alive Timer on, the tcp connection will stay connected even after
the print job has terminated.
•
3 Minutes (default)
•
2 - 10 Minutes